Glass Passage Set
Glass Passage Set
|
|
FLUTED CRYSTAL PASSAGE Set A Perfect Reproduction of the Rubbed Oil Bronze Passage Door Sets of the 1900s, engineered to fit any door with a thickness of 1-3/8″ (1-3/4inches is available, if needed). This set will fit either 2-3/8 or 2-3/4 inch backset. Each set includes two 12 point fluted Crystal standard 2 inch Passage knobs with standard set screws, adjustable Latch set, Spindle, Hand Forged rosettes that connect to eac… |
|
|
Fluted Crystal Glass Passage & OIL Rubbed Bronze Door Knob Sets for Modern Doors+includes Our New Secure Set Screw System. New Adjustable Latch $39.95 Your Purchase for very fine Depression Crystal Passage knobs, perfect Reproductions of the early 1900s antique knobs, so perfect, they are interchangeable with antique hardware. Includes an adjustable tubular latch to fit both standard 2-3/8 in backset or 2-3/8 in backset (see attachment). This set will arrive with all the hardware needed to install in modern pre-drilled door with. The retrofit ha… |
|
|
Fluted Crystal Glass Passage & Brushed Nickel Door Knob Sets for Modern Doors+includes Our New Secure Set Screw System $39.95 Your Purchase for very fine Depression Crystal Passage knobs, perfect Reproductions of the early 1900s antique knobs, so perfect, they are interchangeable with antique hardware. To fit pre-drilled doors with standard 2-3/8, see attachment (2-3/4″ back set available on request) . This set will arrive with all the hardware needed to install in modern pre-drilled door with. The retrofit hardware cont… |
|
|
Fluted Crystal Glass & Antique Brass Passage Door Knob Sets for Modern Doors+includes Our New Secure Set Screw System. $39.95 Your Purchase for very fine Depression Crystal Passage knobs, perfect Reproductions of the early 1900s antique knobs, so perfect, they are interchangeable with antique hardware. This set will arrive with all the hardware needed to install in modern pre-drilled door with standard 2-3/8 in backset (see attachment). The retrofit hardware contains: Tubular Latch set with Striker Plate and matching scr… |
Why do you think Clinton worked with the republicans to deregulate our financail systems in 1999?
(November 1999) An agreement between the Clinton administration and congressional Republicans, reached during all-night negotiations which concluded in the early hours of October 22, sets the stage for passage of the most sweeping banking deregulation bill in American history, lifting virtually all restraints on the operation of the giant monopolies which dominate the financial system.
The proposed Financial Services Modernization Act of 1999 would do away with restrictions on the integration of banking, insurance and stock trading imposed by the Glass-Steagall Act of 1933, one of the central pillars of Roosevelt’s New Deal.
Simple, it’s called politics. It’s what happens when people work together sometimes they do good things….sometimes they don’t.
Method of door construction furniture stores
Panel door
These are made from pieces of solid timber, coffee tables , the stiles and rails being fixed together either by mortise and tenor joints (with wedges) or by dowels. The number of panels may vary, but the general construction is similar with full height stiles on each side with top, middle and bottom rails. The bottom rail is wider than the top rail, and the middle is normally below the mid point – so it is easy to tell which way is up.With the solid timber stiles and rails, these doors can be trimmed fairly easily to fit an existing door frame They must not be excessively trimmed as there is a risk that the sides of the mortise may be exposed in the top/bottom rails or the wedges holding the joints in the stiles becoming weakened. Hollow Doors. These are made using a hidden frame covered with a thin cladding on each face and, normally, solid timber strips down the two edges to give a decorative finish. The cladding may be ordinary hardboard, which can be painted after the door has been hung, or a decorative plywood that can be varnished to give a natural timber appearance.
A number of different types of ‘in-fill’ within the door are available to give the faces some strength and rigidity. The simplest form of in fill, is a cardboard honeycomb, other specialist in-fills are used to make the door fire resistant. Within the door, a solid timber area is provided for fixing the lock and handle; this solid timber is normally restricted to one side of the door and set at a suitable height for the lock/handle. So when hanging a door, it must be hung the correct way up and with the correct side to the hinge – failure to do this will mean that there will be nothing solid within the door where the lock/handles will need to be fitted. Hollow doors cannot really be trimmed (either in height or width) to fit an undersized door frame; this generally means that these doors can only be hung in modern houses where ’standard’ door frames are fitted.
Glazed Doors
Glazed doors are ideal where it is desirable to ‘borrow’ light into a dark area such as a passage.These doors are made with solid timber surround and may be half glazed, full glazed or 2 half glazed. The frame is normally made from solid timber in the same way as for panel doors with the inner edges of the stiles and rails machined to take the glazing. The stiles and upper/lower rails can be trimmed as for a panel door. The important aspect is the type of glass used to glazed the door. UK regulations require that Safety glass is used in full glazed and lower glazed panels; it is always wise to use Safety glass for all glazing in a glazed door. Safety glass cannot be purchased off the shelf, it is in fact ordinary float glass tv stands which has been subjected.
About the Author:
none
Article Source: ArticlesBase.com – History, Method of Door Construction
