Mixed Tool Set
Mixed Tool Set
|
|
Set of 6 Incense Nag Champa Fortune Jasmine Patchouli Romance and Rain Forest By Satya $4.00 Up for sale is this set of 6 incense sticks by Satya. Each package has 15 grams. These are the scents that you will receive.: Nag Champa Fortune Jasmine Patchouli Romance and Rain Forest By Satya…. |
|
|
Mixed Set of Blending Stomps #1 #3 and #8 $2.48 Blending Stumps and Tortillions…High quality blending stumps and tortillions made from soft gray paper felt. Perfect for blending pastel charcoal and graphite drawings. Easy to sharpen with a sanding block…. |
|
|
Calphalon 7-Piece Mixed Utensil Crock Set $34.50 Calphalon Nylon Utensils feature a unique “grip-anywhere handle” that lets you decide where to hold it. Calphalon has combined the all the kitchen utensils shapes and sizes for you to have true versatility and variety in the kitchen with this 7-piece set. With a mix of materials: wood, nylon, and silicone, this is a great all-in-one kitchen utensil tool set. Nylon is heat resistant to 400 degrees … |
|
|
JH WILLIAMS 5 PIECE PREMIUM MIXED SCREWDRIVER SET, COMFORT GRIP HANDLE WITH ROUND BLADE, MADE IN THE U.S.A. $30.78 Made in the U.S.A by JH Williams, a Snap On company. Contents include: #SDR-22 #SDR-24, #SDR-26, #SDP-1-3, #SDP-2-4… |
|
|
Crescent CTK148MP 148 Piece Professional Tool Set with Storage Case $85.66 Contains all tools needed for most industrial applications, including 1/4″, 3/8″ and 1/2″ quick release ratcheting drives with a wide selection of standard and deep sockets in common SAE and metric sizes. Meets new ANSI and ASME specifications…. |
can anyone relate to this She was soooooooooooooo blonde…?
she sent me a fax with a stamp on it.
she thought a quarterback was a refund.
she tried to put M&M’s in alphabetical order
she thought Boyz II Men was a day-care center.
she thought Eartha Kitt was a set of garden tools.
she thought General Motors was in the Army.
she thought Meow Mix was a CD for cats.
she thought TuPac Shakur was a Jewish holiday.
under “education” on her job application, she put “Hooked On Phonics”.
she tried to drown a fish.
she tripped over a cordless phone.
she spent 20 minutes looking at the orange juice can because it
said “concentrate”.
she got stabbed in a shoot-out.
she told me to meet her at the corner of “WALK” and “DONT WALK”.
they had to burn the school down to get her out of third grade.
at the bottom of the application where it says “sign here,” she put “Sagittarius”.
she asked for a price check at the Dollar Store.
I always eat M&M’s in alphabetical order….
& hubbie always askes for a price check in the dollar store!!
ROTFLMHineyO!!
Texas Instruments (TI) positions the MSP 430 family as ultra low power microcontroller family. The family has five different configurations depending on the availability of Flash, ROM/OTP, LCD controller etc besides RAM on a family of devices. For example MSP 430×1xx family has Flash on board, ROM but no LCD controllers. There are further variations in the family depending on the mixed signal devices available on a specific chip. The overall family has a total of 163 devices with sufficient number of members in each sub-family to choose from for a specific design. One can fit a diverse set of designs into these devices.
What is really remarkable is the true low power consumption by these devices when idling as well as when they are delivering processing power. These devices can retain data available on the system RAM at current levels of as low as 0.1 micro Amp, 0.8 micro amp real time clock mode and delivers full processing power at 250 micro amps per MIP. The family delivers 16 bit RISC MIPS from 8 to about 25 for a range of applications. Thus embedded systems, particularly the portable types that use battery power can easily live on that kind of power for a long time.
The ADC and the DAC devices provide interface with the analog world. Timers both real time and general purpose can provide various timing requirements of an embedded system. Watch dog timers make sure there are no latch ups in the software operation. Flash memory controller, DMA controller control on board resources. LCD controller, when available on the chip provide interface to LCD displays. Digital I/O and USART devices take care of communication with the external world. The USART device may be available as an UART, UART configured for SPI communication or a UART configured for I2C communication. Hardware multipliers in some of the devices can ease calculations of numbers including scaling etc that are frequently required in instrumentation designs. A JTAG access helps development, during the debug phase and field maintenance too.
Architecturally all the resources are connected via a system address bus and a system data bus in a classic von Neumann fashion. While the data bus is 16 bit connecting Flash, memory or ROM/OTP resources an adaptor scales it down to 8 bit operation for connecting with the devices on-board. Thus all these devices are straight memory mapped. The flexible interrupt structure helps implement real-time monitoring and control quite easy to implement. The programming model is that of a linear space that includes the special function registers (The PC, SP and so on), general purpose registers, the peripherals ( both 8 and 16 bit), memory resources and interrupt vectors. SFR occupy the lower end of addresses while the top end is occupied by the interrupt vectors. Besides the ALU there are 16 registers of which two are assigned to the Program counter (PC) and the Stack Pointer (SP) and a status register. Couple of registers does dual duty as constant generator 1 & 2. The rest are fully general purpose registers.
Development tools take care of the addressing mode. However, if you do resort to assembly language programming it is better to be aware of the modes. Being RISC devices these modes are not complex at all. They are register mode, indexed mode, symbolic mode, absolute mode, indirect register mode, indirect auto-increment and immediate mode. These have the standard meaning except the symbolic mode which apparently is the relative mode.
Development boards, tool-chains, JTAG support and every other developmental needs are met by multiple manufacturers besides TI. There are some free source tools also available. Quick time to market for your projects are thus ensured.
Debasis Das has worked with technology companies for close to four decades, 25 years of which has been with IT consulting companies. He has managed software and Geospatial industry outsourcing from India for International clientele. He has worked with customers from US, Europe, Japan and China. He is widely traveled and currently engaged in consultancy in software, embedded systems and technical contents.
Contact at ddas15847@yahoo.com
Web site at http://www.consult-debasis.com
