Laurelacehardware.com

Screwdriver Set Case

New Harris Corporation PRO 3000 Tone Generator With Probe Kit De-Energized Electrical Wire Coax $89.21 Tones up to 10 miles on most cable. Harris’ PRO3000 Tone and Probe Kit is THE professional kit you need fortracing and toning wire or cable. Use it on de-energized AC wire, telephone/twisted pair wire, allvoice and data category rated cable, all coax cable, speaker wire, security wire, virtually and cable or wire! All in a durable nylon pouch with three pockets and extra large belt loop.. PRO300…

Smartworks 25 Piece Compact Travel Tool Kit with Travel Case $8.69 Portable 25 Piece Travel Tool Kit Set in Carry Case includes many of the things you need whenever you need tools. Includes Ergonomic Universal Drive Handle Holder with Driver Bit Extension and 10 Driver Bits different kinds 4,5,6, PH1, PH2, PZ1, PZ2, T15,T20, 4 Allen Wrenches, 9 Ratchet Set 5-13 mm, with bit holder and Driver Bit Extension for those hard to reach places. Conveniently holstered i…

New Harris Corporation Fluke Networks D814 Impact Tool 3X Eversharp 66&110 Blades Maximum Durability $72.20 Harris impact tools are the professionals’ choice and consistently achieve the highest possible certification on network installations the first time. Quality terminations mean quality installations, every time. Tool Operation, use tool to properly set, seat and/or terminate wire. When tool punches down on wire a loud pop will indicate wire is properly seated. Blade storagein handle. Stays shar…

Neiko 100-Piece Security Bits Set with Hard Storage Case $6.49 100 pc. Security Bits Set Security bits set contains many of the most common tamper proof type security bit sizes, including tri-wing bits, torx bits, spanner bits, and hex bits. Security bits set contains: 1 – wing nut driver. 1 – magnetic bit holder. 1 – socket bit holder. 1 – 1/4″ sq. x 1/4″ hex x 1″ extension. 1 – 1/4″ sq. x 1/4″ hex x 2″ extension. 3 – clutch bits (# 1, 2 & 3). 3 – torq bits …

SE 6pc Mini Screw Driver Set With Carrying Case $3.99 6 Piece High Quality Professional Screw Driver Kit, everything you need for Eyeglasses, Cameras, Watches, Hobbies, Electronics, and other Small appliance repair. Each Driver Has Knurled Shaft for Non-Slip Grip. Chrome Plated Shaft and Black Oxidized Bar to Resist Rust. Durable Storage Case. Set Includes: Flat 1.4mm, 2.4mm, 3.0mm, Phillips 00, 0, 1….

PC Toolkit?

I am trying to gather a toolkit with these items:
-Case (To store the below)
-Several Phillips screwdriver (non-magnetic)
-Several Straight slot screwdrivers (flat head, non-magnetic)
-Several Star Torx Screwdrivers
-2 nut drivers
-tweezers
-a little grabber tool
-flashlight
-magnifying glass
-antistatic wrist strap (preferably with a grounding plug)
- 1 DDR and 1 DDR2 RAM stick
-1 PCI Video Card (32 mb+)
-NIC (Network Interface Card)
-300 Watt Power supply
-Flashdrive (got it, just need to be able to store in case)
-compressed air can
-lint-free cloths
-small softbristled brush
-non-static vacuum
-multi-use gloves (rubber)
-type c or abc fire extinguisher
-rubber shoes
-disc drive (have it, just need room in case to store it)

do not fail for cheap $15 $25 PC kits. They won’t last long. check for belkin PC repair kit..i paid for mine $25 it has 55 pieces.

good luck

Today what I’m going to present is probably not the easiest or finest way of opening an iPod classic, but it works.  Oh, and I will not take responsibility for damage, injuries, etc.

First, present is a little of background on the problem.  If you have ever played around with any surgeries on any  older iPods (replacing the iPod battery, LCD, disc drive, earphone jack, motherboard, clickwheel, etc), you’re likely pretty good with the methods of opening them.  The 5th gen iPod  is very close to the classic with respect to visual aspect, so you might wonder why the classic is much harder to crack open.  It seems that Apple’s accounting department has taken notice of do-it-yourself kids lowering their gross profits by repairing their own troubles.  Beginning with the classic, Apple has kindly expanded the functional protection of the case.  In other words, they have established complicated metal tabs into the casing of the classic.  These tabs pretty much deny any of the soft plastic tools that one can use to open the later cases.  This is also why you do not find many how-to’s about opening classics.

Now arrives the challenging but apparent decision: there is no simple means to open the shell without damaging it. If you don’t crack it open, though, the iPod becomes a $300 paperweight.  When you come to terms with this, continue reading.

There are posts and videos that talk about applying knives to pry open the iPod classic, or utilizing screwdrivers or other tools to force the casing separate.  Once you get some practice, you can get them open in roughly fifteen minutes; the very first time I gave it a shot, it required an hour, and I destroyed an LCD.  In my belief these operations are far too risky, because one wrong blow and the LCD cracks.  Or worse, you force a blade into the motherboard.  I have seen a had disk with a knife wound, not to mention infinite damaged earphone hold switch, hard disk, etc..  There’s a sounder way to get inside the iPod classic, but it will take power tools and some firm hands.

If you have a Dremel or other rotary instrument, you’re in luck.  If not, go find one, because you’re going to need it for something .  You could in all probability use a drill with a low bit, but this one is more risky, as you could drive the bit into the innards if you break through the casing.  Anyway, slap on the carbon cutting bit, some goggles, and determine a place to work.

Clinch the iPod so it cannot go anyplace, but be sure not to beat the internals or scratch the casing excessively much.  Obviously the LCD is not the easiest site to clamp, unless that’s the thing you’re exchanging.  Be sure your iPod’s hold switch is on; I’d propose taping it down.  Slowly poke three shallow grooves with the rotary instrument at the positions of these grips.  These should be only low enough so that you can see within the casing in the middle of the groove.  Be certain not to go excessively deep and not to let the rotary tool run off of the iPod.  You can immediately work your instruments within the shell halves.  This section takes some patience also, so don’t rush it.  From here, you can immediately proceed about the shell and crack it open.

When you’ve got the insides made out, smack on some tape to seal it and get yourself a silicone case and you’re all set!

About the Author:

pcXmedics is a computer, iPod, and technical repair team based in Ithaca and Binghamton NY. For additional help on computer, iPod, or desktop repair, visit us at http://www.pcxmedics.com

Article Source: ArticlesBase.com – How to Open and Dissemble an iPod Classic Case